115/230V 3/4HP Fuel Transfer Pump. Pumping rate up to 30 GPM (113LPM). 1" x 18' fuel hose with ultra high flow automatic nozzle. 2 threaded base for tank openings. 1-1/4 NPT inlet and 1 NPT outlet with a 30 minute duty cycle. Equipped with a 901 Mechanical Fuel Meter. For use with above ground and underground tanks.
Two year warranty
12-FR311VB

GPM: 30
Automatic Nozzle
18' Lift
Use with diesel fuel, gasoline, kerosene, mineral spirits, stoddard solvent and heptane. (Not to be used with fluids that have a flash point of 100° F or less.)

Telescoping Suction Pipe

All-steel 1" NPT suction pipes telescope from 22" to 40" (55.88cm - 101.6cm) to adapt easily to almost any tank or drum. Rugged construction withstands season after season of heavy use.

The CAM TWIST Breakaway is the only breakaway that gives you the option to easily disconnect, inspect and reconnect while installed. "Rare Earth Permanent Magnets" never lose holding strength. To inspect the unit, two wrenches applied to opposite ends of the breakaway with a twisting motion mechanically separates the unit. Designed to be installed between the dispenser and the nozzle. It is simple to inspect the unit. The unique design seals the internal components before a separation is complete, thus reducing any exposure to product and any environmental impact. With the CAM TWIST alignment and reconnection is easy. Align the two halves together & let the magnets do the work while pushing the unit back together! It's that easy!

No repair kit needed to reassemble
Less than 300 lbs. separation force
Lightweight, Aluminum Body
Replaceable Viton O-ring & Seals
Nylon Cover
UL/ULC Listed
CARB Certified
Meets NFPA 30A Codes
Made in USA
One year warranty

The CAM TWIST Breakaway is the only breakaway that gives you the option to easily disconnect, inspect and reconnect while installed. "Rare Earth Permanent Magnets" never lose holding strength. To inspect the unit, two wrenches applied to opposite ends of the breakaway with a twisting motion mechanically separates the unit. Designed to be installed between the dispenser and the nozzle. It is simple to inspect the unit. The unique design seals the internal components before a separation is complete, thus reducing any exposure to product and any environmental impact. With the CAM TWIST alignment and reconnection is easy. Align the two halves together & let the magnets do the work while pushing the unit back together! It's that easy!

No repair kit needed to reassemble
Less than 300 lbs. separation force
Lightweight, Aluminum Body
Replaceable Viton O-ring & Seals
Nylon Cover
UL/ULC Listed
CARB Certified
Meets NFPA 30A Codes
Made in USA
One year warranty

By the foot.

By the foot.

By the foot.

By the foot.

Honda 32105-Z6L-000 Sub-Wire Harness; 32105Z6L000 Made by Honda

DC Solution Pump 5.3gpm. Used on new model Spider Classics

Fleet includes, fuel pump hardwired to battery with 110v battery tender wired for maintaining battery. Must be shipped on pallet, cannot ship UPS.

Tire for the DT475 / DOT500 / DT200 Trailer

Complete assembly. Comes with 3ft. suction tube.

Replacement vented fuel cap for LeeAgra all LeeAgra fuel tanks.

Aluminum multi-plane swivel w/ 360 deg. rotation. 1in.

Aluminum multi-plane swivel w/ 360 deg. rotation. 1in.

Two can be installed on top of a DT200 or DT2x100 for tool placement, or equipment mounting.

No filter package or siphon tube.